Alloy Grade / UNS: 14-4 PH

  • Overview

    Extremely high strength stainless steels that are more corrosion resistant than 400-series martensitics.

  • Typical Uses

    Aerospace, chemical and food processing equipment, cylinders, gears, hollow shafts, landing gears, marine gas turbine, nuclear flow control, pump and valve components, pressure vessels, shaft sleeves, turbine engine parts.

  • 正规的彩票app合集 Grade

    14-4 PH®

* Produced under license of AK Properties / ARMCO Advance Materials Corp.

Similar Specifications

Cast UNS: J92240

Cast Grade: 14-4 PH

Military/AMS: AMS 5340

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.06

Chromium: 13.50-14.25

Manganese: 0.7

Iron: n/a

Copper: 3.0-3.5

Nickel: 3.75-4.75

Lead: n/a

Tin: n/a

Silicon: 0.50-1.00

Zinc: n/a

Other: Mo 2.0-2.5; Nb 0.15-0.35; Ta 0.05 MAX; N 0.05 MAX

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal, HOMOG, Age

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the 正规的彩票app合集 family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.